Product Introduction

Product parameters

Funtion：6A, Step-down 2-cell Li+ Battery Charger IC With Photovoltaic Cell MPPT Function

Opration Mode：Switch

Battery：2 cell li-ion battery

Battery No.：2

Vout Range：0V-8.4V

Vin Range：6.5V-30V

Max Charge Current：6A

Operating Current：658uA

Solar Panel charge：YES

Chip Temperature Regulation：YES

Package：TSSOP16

Switching Frequency：550kHz

Chip Enable：No

On-chip Power MOSFET：No

General Description:

CN3882 is a step-down PWM switch-mode charger IC for 2-cell lithium-ion batteries with few external components in small footprint package.

The CN3882 is specially designed for charging 2-cell lithium ion batteries with trickle charge, constant current and constant voltage mode. In constant voltage mode, the regulation voltage is fixed at 8.4V with 1% accuracy. The constant charging current is set with an external current sense resistor.

When solar panel is used as power supply, CN3882 can automatically adjust charge current to track solar panel’s maximum power point.

Deeply discharged batteries are automatically trickle charged at 25% of the full-scale charge current until the cell voltage exceeds 66.6% of regulation voltage. The charge cycle is terminated once the charge current drops to 15% of full-scale charge current, and a new charge cycle automatically restarts if battery voltage falls below 95.8% of regulation voltage. CN3882 will automatically enter sleep mode when input voltage is lower than battery voltage.

Other features include JEITA-compliant battery temperature monitoring, battery reverse current blocking, battery over voltage protection, 2 open-drain status indications, etc.

CN3882 is available in 16-pin TSSOP package.

Applications:

l Handheld Equipment

l Emergency Lighting

l Industrial and Medical Equipment

l Electric Tools

l Audio/Video Systems

Features:

l Solar Panel MPPT Function

l Standalone Charge Management for 2-cell Lithium-ion Battery

l Wide Input Voltage: 6.5V to 30V

l Charge Current up to 6A